Lindab Aluzink 125 mm is a high-quality gutter system that combines aluminum, zinc and silicon for superior protection against rust. It is specially developed for the Nordic climate and offers a significantly longer lifespan than standard sheet metal. The silver matt surface gives the house a modern finish and patinas nicely over time
Our range includes everything needed for a complete system, from gutters and downpipes to gutter angles and folding domes. The 125 mm dimension is optimal for effectively draining large amounts of rainwater and protecting the foundation of the house.
-
BK Pipe Bend Conical 87 mm Aluzinc, Lindab 87840
This 70-degree bend is specifically designed to fit perfectly with the offset bend in the downspout system
004911930
8.6EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 1 till 5 vardagar
-
GROR Branch Pipe Adjustable 87mm Aluzinc, Lindab 74921
A branch pipe that allows you to connect multiple downspouts even when there is only one ground pipe available
004911745
35.4EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 1 till 5 vardagar
-
Hängränna 125/4000mm Aluzink R Lindab 14940
Hängränna 125/4000mm Aluzink R Lindab. Överlägsen livslängd. Smart konstruktion gör monteringsarbetet mycket enkelt och snabbt.Mått D: 125 mm.Mått d: 17 mm.Längd: 4000 mm.
004911387
29.3EUR / pc.Add to favorites- Stock status
- Available in store
-
Intermediate Piece MST 87/1000mm Zinc Magnesium, Lindab 9731
A short downpipe that facilitates e.g. when mounting between two bends.
007654746
17.1EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 6 vardagar
-
K21 Gutter Hook Long 210mm Aluzinc, Lindab 23042
This gutter hook is bent on the construction site to the correct angles to create the right slope for the gutter.
004910802
0.0EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 3 till 7 vardagar
-
KFK Gutter Hook Short, Fixed 125mm Aluzinc, Lindab 33362
Short hook for mounting on a straight fascia board. This product is made of powder-coated galvanized steel with a thickness of 5 mm.
004910989
3.0EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 1 till 5 vardagar
-
OMV Flashing Cone 125/87mm Aluzinc, Lindab 6847
Folding cup for installation between the gutter and the bend or downspout.
005240017
7.8EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 1 till 5 vardagar
-
Påskjutsrör 87mm Aluzink PRT Lindab
Påskjutsrör 87mm Aluzink PRT Lindab. Påskjut till Renstratt RT. Överlägsen livslängd. Smart konstruktion gör monteringsarbetet mycket enkelt och snabbt. Dimension: 87 mm. Längd: 260 mm.
004911804
7.9EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 1 till 5 vardagar
-
RG Gutter Outlet 125mm Aluzinc, Lindab 4848
An end piece that fits both the right and left sides of the gutter.
004992661
3.0EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 1 till 5 vardagar
-
RSK Gutter Joint 125mm Aluzinc, Lindab 48132
This gutter joint features an innovative design with a rubber seal for a better and completely waterproof installation between two gutters
004911060
4.5EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 1 till 5 vardagar
-
RT Cleanout Funnel Silver Metallic, Lindab 96635
Leaf strainer in HD polyethylene plastic. The lower part fits in standard ground drainage pipes (110 mm).
004911883
14.3EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 1 till 5 vardagar
-
RVI Gutter Angle Inside Corner 125 mm 90° Aluzinc, Lindab 35975
This gutter angle is designed for half-round gutters and is available in 90 or 135-degree angles
004911194
24.1EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 1 till 5 vardagar
-
RVI Gutter Angle Inside Corner 125mm 135° Aluzinc, Lindab 36064
It is made of galvanized steel with a thickness of 0.6 mm.
004911139
37.5EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 1 till 5 vardagar
-
RVY Gutter Angle Outside Corner 125mm 90° Aluzinc, Lindab 34945
It can also be custom-made according to specific requirements. The product is made of pre-coated galvanized steel
004911218
26.8EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 1 till 5 vardagar
-
SKK Adjustable Hook with Clamp Silvermetallic 125mm, Lindab 13158
An adjustable hook in thin sheet metal with clamps in both the front and rear. It has a hole pattern at the bottom that simplifies the installation
007837908
4.1EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 1 till 5 vardagar
-
SV Wall Sweep with Wedge without Foot 87mm Aluzinc, Lindab 2360
This sweep for round downspouts fits perfectly and is made from a single piece of sheet steel.
004912264
3.4EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 1 till 5 vardagar
-
SVHA Sweep with Wedge for Timber Wall 87mm Aluzinc, Lindab 60246
This sweep for round downspouts fits perfectly and is made from a single piece of sheet steel
004912146
3.1EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 1 till 5 vardagar
-
TB Cover Bracket Silver Metallic 125mm, Lindab 97471
This product is made of powder-coated galvanized steel with a thickness of 1.0 mm.
004911566
4.1EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 1 till 5 vardagar
-
UTK Downspout Nozzle 87 mm Aluzinc, Lindab 64530
This downspout outlet is compatible with both crimped and non-crimped downspouts.
004912660
10.6EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 1 till 5 vardagar
Lindab Aluzink is known for its high precision, which makes installation quick and easy for both professionals and DIYers. With robust gutter hooks, pipe bends and branch pipes, you can easily create a functional system that drains water in a controlled manner. Invest in an original system from Lindab for a technically proven solution that increases the value of your property.