JHR Joist Hanger 45x137x1.5mm Hot-Dip Galvanized Steel 25pcs Fast 833288

Description

The JHR joist hanger is a reinforced, high-quality version of the classic JH joist hanger, specifically developed to simplify installation in demanding timber construction projects. This robust bracket includes a clever mounting aid: an integrated prong on each side flange. Once these prongs are tapped into the beam, the hanger remains securely in place, significantly simplifying alignment and final fastening during flush-mount installations.

This model is manufactured from S250GD hot-dip galvanized steel with a Z275 coating, providing excellent corrosion resistance and a long service life, even in harsh environments. The design supports both nail and bolt connections, ensuring a flexible and exceptionally strong attachment to various structural materials, including timber, concrete, and lightweight concrete.

Features and Benefits

• Reinforced construction capable of withstanding high loads in load-bearing structural applications
• Integrated positioning tabs that hold the joist hanger in place throughout the installation process
• Flexible attachment options, featuring both nail and bolt holes for a wide range of applications
• Manufactured from hot-dip galvanized sheet steel with a Z275 coating for reliable corrosion protection
• Optimized for connecting timber beams in the same plane with high precision

Applications

The JHR joist hanger is primarily used for connecting secondary beams to primary beams or walls within the same plane. Thanks to its versatile design—incorporating both nail and bolt holes—the connector can be installed in various materials, including timber, concrete, and lightweight concrete. It is a preferred choice for roof trusses, floor joists, and other load-bearing timber structures where high strength and ease of installation are required.

Assembly and Installation

During installation, it is essential that the height of the joist hanger corresponds to at least two-thirds of the secondary beam's height to ensure adequate load-bearing capacity. A distance of at least 20 mm must be maintained between the top edge of the beam and the uppermost nail hole. For an optimal fit, the width of the connector should exceed the width of the beam by no more than 3 mm. To secure the hanger, use 4.0 mm anchor nails or 4.8 mm anchor screws in the designated nail holes. For the bolt holes, use M8 or M10 bolts, depending on the specific structural requirements.

Technical Specifications

• Product Type: Joist Hanger JHR
• Material: Hot-dip galvanized steel sheet S250GD+Z275
• Dimensions (W x H x T): 45 x 137 x 1.5 mm
• Flange: 38 mm
• Nail holes: 5 mm
• Bolt holes: 9 mm and 11 mm
• Recommended maximum joist height: 205 mm
• Quantity per pack: 25 pcs