Fiberglass Tape 60101 48mmx45m Tesa

Description

Tesa 60101 is a professional, self-adhesive fiberglass tape designed for maximum strength and time savings in renovation and construction work. This advanced reinforcement tape consists of an extremely strong, flat interconnected fiberglass mesh combined with a powerful acrylic adhesive. The tape is the perfect choice for creating seamless, durable butt joints between plasterboards and for quickly repairing cracks and holes in walls and ceilings. Thanks to the high-performance acrylic adhesive, Tesa 60101 sticks directly to polar surfaces, even if the substrate is rough or slightly dusty. The tape covers butt joints and damage up to 3 mm deep without the need for pre-filling. This saves you a moment in the work as the filling can be done directly over the tape, which gives an even and crack-free end result every time.

Benefits and areas of use

• Plaster joints & Butt joints: Geometrically stable fabric for crack-free joining of plasterboards.
• Fast Wall Repair: Repair small holes, cracks and damage in plaster and plaster surfaces.
• No Pre-filling Required: Apply the tape directly over holes/damage up to 3 mm deep.
• High Tensile Strength: Only needs to be installed once for a permanent and durable result.
• Age-resistant: Durable construction that does not break down over time.

Main applications

• Gypsum board jointing: Creates durable, flat and crack-free butt joints between gypsum boards before filling.
• Direct wall repairs: Cover and repair minor holes, damage and cracks up to 3 mm deep in gypsum, plaster and concrete surfaces without the need for fillers.
• Surface reinforcement: Reinforces exposed zones, joints and transitions in wall and ceiling structures to prevent future cracking.

Instructions for use

• Prepare the surface: Clean the surface from loose dust, dirt and moisture.
• Apply the tape: Press the self-adhesive tape firmly directly over the gypsum joint or crack. No filler is required under the tape.
• Finishing: Spread the filler directly over the fiberglass mesh with a putty knife, smooth the edges and sand when dry.

Specifications

• Model: 60101
• Width x Length: 48mm x 45m
• Backing Material: Fiberglass
• Colour: White
• Total Thickness: 185 µm
• Adhesive: Acrylate
• Tear Strength: 50 N/cm
• Elongation at Break: 5%
• Adhesion to Steel: 0.5 N/cm
• Suitable for Uneven Surfaces: Very Good