CTC Display Unit EZ i350/EV i350F II

Description

Upgrade or replace the control panel on your CTC heat pump or exhaust air module. The CTC Display Unit EZ i350/EV i350F II is an original color display with a touchscreen interface, developed for easy software updates and smooth connection to your local WiFi network (including support for CTC Connect). This display unit is suitable both as a direct replacement for a broken screen and as an upgrade for systems that require full network compatibility and modern control.

Main features

• WiFi and app compatible: Allows you to remotely control and monitor the heating system directly via smartphone.
• Easy software update: Ensures access to the latest functions and performance improvements from CTC.
• Clear touch screen: Sharp color screen that simplifies adjustment of heating curves, hot water and ventilation.
• CTC Original spare part: Plug-and-play compatibility with maintained operational reliability and factory warranty.

Compatibility

The display unit is factory-fitted for the following CTC systems:

• CTC EcoVent i350F
• CTC EcoVent i360F
• CTC EcoZenith i350

Physical replacement and installation

• Mechanical installation ("Book opening"): The display is recessed into the front cover of the heat pump. It is normally opened by gently prying/pulling from the right side, just like opening a book cover.
• Cabling: Connected via CTC's dedicated flat cable/communication cable directly to the relay board/control board and any network cable/antenna.

Important during installation

• Always switch off the mains voltage (mains switch) to the heat pump before opening the front or disconnecting cables.
• When starting up after replacement, the system configuration is read in from the system's motherboard/relay board, or an initial parameter setting is made via the display's installation guide.

Specifications

• Product name: Display unit EZ i350 / EV i350F II w. internet connection
• Display type: 4.3-inch TFT color touchscreen
• Network and Interface: Integrated Wi-Fi / Ethernet connection and USB port on the back/side for offline software updates
• System architecture: Generation II (Generation 2) hardware with extended flash memory for newer firmware
• Application area: Software update, WiFi control, spare part