-
LK Pipe Straightener 16-25mm
Straightener for LK PAL Universal Pipe A, 16-25 mm on a roll. When the pipe is pulled by hand through the straightener, it becomes straight.
1872537
740.1EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 10 vardagar
-
LK Pipe Umbrella LP 16/25mm
LK Pipe Umbrella is used to prevent any leakage from getting in between the service pipe and the empty pipe.
1882735
2.2EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 1 till 5 vardagar
-
LK Pipe Umbrella LP 20-25/34mm
LK Tomrörsparaply används för att förhindra eventuellt läckage att ta sig in mellan medierör och tomrör.
1882698
2.2EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 1 till 5 vardagar
-
LK Pipe Wrench 16-32mm
LK Pipe Wrench 16-32 facilitates the assembly of LK PE-X and LK PAL Universal pipes in LK PushFit couplings, for example in tight spaces.
1882697
140.5EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 10 vardagar
-
LK Plastic Clamps Empty Pipe Black
Plastic clamps for clamping empty pipes, the clamp has two pre-assembled screws that go 17mm into the substrate, Torx 20.
1882400
2.0EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 10 vardagar
-
LK Plastic Clamps Hollow Pipe 34mm
Plastic clamps for clamping hollow pipes. The clamp has two pre-assembled screws that go 17 mm into the substrate, Torx 20.
1880763
1.4EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 1 till 5 vardagar
-
LK Plastic Pipe Clamp 25mm
Equipped with damping rubber and with welded-on nut M8, for pendulum brackets, pendulums, threaded rods, etc.
1870581
3.9EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 5 vardagar
-
LK Plastic Pipe Clamp 32mm
Equipped with damping rubber and with welded-on nut M8, for pendulum brackets, pendulums, threaded rods, etc.
1871577
5.5EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 10 vardagar
-
LK Plastic Pipe Clamp 40mm
Equipped with damping rubber and with welded-on nut M8, for pendulum brackets, pendulums, threaded rods, etc.
1871578
6.1EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 10 vardagar
-
LK Plastic Pipe Clamp 50mm
Equipped with damping rubber and with welded-on nut M8, for pendulum brackets, pendulums, threaded rods, etc.
1871579
7.1EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 10 vardagar
-
LK Plastic Pipe Clamp 63mm
Equipped with damping rubber and with welded-on nut M8, for pendulum brackets, pendulums, threaded rods, etc.
1871580
8.6EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 10 vardagar
-
LK Plastic Pipe Clamp A75
Equipped with damping rubber and with welded-on nut M8, for pendulum brackets, pendulums, threaded rods, etc.
1882368
9.3EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 10 vardagar
-
LK Plastic Pipe Clamp AX16-AX20
Equipped with damping rubber and with welded-on nut M8. For pendulum brackets, pendulums, threaded rods, etc.
1880670
3.1EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 4 till 10 vardagar
-
LK PressPex Angle Transition Universal Pipe Cu AX16x12mmx90°
Press coupling for joining LK PAL and LK PE-X Universal pipes, when using PressPex coupling with plain end made of brass.
1882552
13.3EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 10 vardagar
-
LK PressPex Ball Valve AX16mmxCu10mm
Ball valve with PressPex connection for LK PE-X and PAL Universal pipe 16.
4814404
24.6EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 5 vardagar
-
LK PressPex Calibration Tool F9
The calibration tool is intended for calibration and simultaneous chamfering of pipe ends.
1881522
67.0EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 4 till 10 vardagar
-
LK PressPex Eco Push-In Sleeve A40
LK PressPex Push-in Sleeve for LK PAL and LK PE-X Universal Pipes for splicing and repairing blunt pipe connections.
1882672
98.0EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 10 vardagar
-
LK PressPex Eco Push-In Sleeve A50
LK PressPex Push-in Sleeve for LK PAL and LK PE-X Universal Pipes for splicing and repairing blunt pipe connections.
1882673
141.5EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 10 vardagar
-
LK PressPex Eco Push-In Sleeve A63
LK PressPex Push-in Sleeve for LK PAL and LK PE-X Universal Pipes for splicing and repairing blunt pipe connections.
1882674
207.8EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 10 vardagar
-
LK PressPex Eco Push-In Sleeve A75
LK PressPex Push-in Sleeve for LK PAL and LK PE-X Universal Pipes for splicing and repairing blunt pipe connections.
1882675
256.4EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 10 vardagar
-
LK PressPex Eco Push-In Sleeve AX25
LK PressPex Push-in Sleeve for LK PAL and LK PE-X Universal Pipes for splicing and repairing blunt pipe connections.
1882670
47.0EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 10 vardagar
-
LK PressPex Eco Push-in Sleeve A32
LK PressPex Push-in Sleeve for LK PAL and LK PE-X Universal Pipes for splicing and repairing blunt pipe connections.
1882671
63.7EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 10 vardagar
-
LK PressPex Eco Push-in Sleeve AX20
LK PressPex Push-in Sleeve for LK PAL and LK PE-X Universal Pipes for splicing and repairing blunt pipe connections.
1882669
36.8EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 10 vardagar
-
LK PressPex Eco Valve Coupling A32xM40 Nickel
Press coupling for joining LK PAL and LK PE-X Universal pipes. The coupling has a metallic seal against LK Ball Valve high neck.
1882574
33.0EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 10 vardagar
-
LK PressPex Eco Valve Coupling AX20xM26 Nickel
Press coupling for joining LK PAL and LK PE-X Universal pipes. The coupling has a metallic seal against LK Ball Valve high neck.
1882572
17.2EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 10 vardagar
