-
LK Base UNI-GV 450mm
LK Base is used when Distributor Cabinet UNI is mounted on the outside of an existing wall. Equipped with a hole for mounting cabinet drainage.
1881302
105.8EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 10 vardagar
-
LK Base UNI-GV 700mm
LK Base is used when Distributor Cabinet UNI-GV is mounted on the outside of an existing wall. Equipped with a hole for mounting cabinet drainage.
1881300
120.4EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 10 vardagar
-
LK Bellows Sleeve 25 LP
Sleeve for connecting drain pipes dim 25 to drain sockets on cabinets GV and UNI, Type approved and tested according to SP method 5676.
1882742
20.7EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 10 vardagar
-
LK Bend Support UNI-Floor
For pipe risers from the floor with LK Universal RiR dim AX16 and AX20, Made of surface-treated steel sheet.
4814381
13.2EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 1 till 5 vardagar
-
LK Bend Support UNI-Wall
Combined with LK Bend Support UNI-Floor where, for example, radiators are to be disconnected from the wall.
4814380
14.6EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 10 vardagar
-
LK Bending Spring Internal A32
For cold bending of LK PAL Universal Pipe type A and hot bending of LK PE-X Universal Pipe type X.
1881858
47.6EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 10 vardagar
-
LK Bending Spring Internal A40
For cold bending of LK PAL Universal Pipe type A and hot bending of LK PE-X Universal Pipe type X.
1881859
63.9EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 10 vardagar
-
LK Bending Spring Internal AX16
For cold bending of LK PAL Universal Pipe type A and hot bending of LK PE-X Universal Pipe type X. The spring is intended for use inside the pipe.
1876898
18.0EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 1 till 5 vardagar
-
LK Bending Spring Internal AX20
For cold bending of LK PAL Universal Pipe type A and hot bending of LK PE-X Universal Pipe type X. The spring is intended for use inside the pipe.
1877784
25.1EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 1 till 5 vardagar
-
LK Bending Spring Internal AX25
For cold bending of LK PAL Universal Pipe type A and hot bending of LK PE-X Universal Pipe type X. The spring is intended for use inside the pipe.
1877785
35.1EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 1 till 5 vardagar
-
LK Bending Spring UTV AX16
For cold bending of LK PAL Universal pipe type A and hot bending of LK PE-X Universal pipe type X.
1872548
21.5EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 10 vardagar
-
LK Bending Spring UTV AX20
For cold bending of LK PAL Universal Pipe Type A and hot bending of LK PE-X Universal Pipe Type X.
1872549
27.9EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 10 vardagar
-
LK Bending Spring UTV AX25
For cold bending of LK PAL Universal Pipe Type A and hot bending of LK PE-X Universal Pipe Type X.
1872550
37.3EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 10 vardagar
-
LK Bending Tool PAL
A tool specially designed for precision bending of LK PAL Universal pipes, with a clear graduation that shows the desired bending angle.
1878175
388.8EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 10 vardagar
-
LK Bending Tool PAL 16-32mm Aluminum
For cold bending of LK PAL Universal pipes dimensions 16, 20, 25 and 32mm, bending dies in aluminum.
1882511
385.1EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 10 vardagar
-
LK Bits TX15 110mm Grey
Torx bits that are adapted in length to simplify the assembly of the screws when attaching the LK Wall Box UNI Push.
1882302
14.0EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 4 till 10 vardagar
-
LK Blue Insert For Wall Box
Spare part for LK Wall Box, blue plastic insert for the neck of the box that locks the connection.
29884
4.5EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 10 vardagar
-
LK Bottom Plug
For temporary plugging of drainage holes or drainage bends in distribution cabinets when the bottom of this cabinet is to be tested for tightness.
1888488
2.5EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 4 till 10 vardagar
-
LK Box Cutter UNI
Cutting tool for easy cutting of the neck of all LK Wall Boxes UNI, minimum cutting distance from the wall is 4mm.
1876494
101.2EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 1 till 5 vardagar
-
LK Box Cutter UNI UTV Blue
Cutting tool for easy cutting of the neck of all LK Wall Box UNI and LK Wall Box UNI Push to the correct distance from the finished wall.
1882154
133.4EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 1 till 5 vardagar
-
LK Bracket For Junction Box c/c 40mm
Fixation plate used to obtain c/c 40mm or c/c 50mm between LK Junction Boxes.
1870811
4.7EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 10 vardagar
-
LK Bracket For Junction Box c/c 50mm
Fixation plate used to obtain c/c 40mm or c/c 50mm between LK Junction Boxes.
1870812
5.0EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 10 vardagar
-
LK Cabinet Grommet 50-32
For grommet of pipes dim 32-34-40-50 in LK Water Meter Cabinet UNI and Cabinet Qmax with 65mm hole grommet.
1882555
11.9EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 10 vardagar
-
LK Calibration Set UNI 16/20/25mm
Manual tool for deburring and calibrating 16/20/25 mm PAL and PE-X pipes. Ensures correct chamfering for damage-free installation.
1876896
36.6EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 1 till 5 vardagar
-
LK Caulking Gun Support 3D Premium
The LK Caulking Gun Support accessory is a support leg that can be mounted on the LK 3D Premium Caulking Gun.
1880673
19.4EUR / pc.Add to favorites- Stock status
- Lev. normalt inom ca 1 till 5 vardagar
Search
My pages
Favorites
Favorites count:
Basket
Items count:
