Metro Therm Water Heater Cabinet 110E

Description

The Metro Therm Cabinet series is known for its award-winning design and extremely low energy losses. The Metro Therm Cabinet 110 E is the perfect choice to cover the daily hot water needs of 2-3 people in the summer cottage, holiday home or in the year-round home with slightly less consumption. Do you have a wood or pellet boiler and want to avoid burning firewood for hot water during the summer? Then this heater is the optimal solution.

Fast recovery and flexible installation

The volume is enough for about 3-4 three-minute showers. Thanks to an efficient immersion heater, the water heater recovers quickly, which also makes it ideal for expanding the volume in an existing heat pump. The water heater has an elegant design in white-lacquered steel with a stylish silver strip that fits perfectly in modern kitchens and bathrooms. It can be easily mounted on the wall with the included brackets, or placed on the floor with a leg stand (available as an accessory). Are you short on space? The model with a conventional thermostat can also be installed horizontally (back position), which however reduces the effective volume by about 25%.

The best choice for lime-rich water and your own well

The water tank consists of glass-enamelled steel with indirect heating, which provides market-leading protection against corrosion. This model is especially recommended for households with their own well or in areas with high lime and chloride content, such as:

• Oland and Gotland
• Osterlen
• Uppsala and Norrtalje

Important about water quality: The enamelled pressure vessel steel is protected by a magnesium anode that should be checked every two years. For the best service life, the chloride content should not exceed 250 mg Cl/l and the pH value should be between 6 and 9. In the case of extremely high/low chloride levels or high manganese content, an electric titanium anode is recommended. (In the case of very high pH values, a stainless steel water heater from the Metro Therm or Focus range is recommended instead).

Technical specification and installation

• Power: 3 kW for fixed 2-phase installation (maximum power) / 1 kW when connected to 1-phase with a plug.
• Electric immersion heater: Mounted in a protective tube (makes it extra resistant to limescale).
• Scope of delivery: Complete fitting set included (safety valve, mixing valve and shut-off valve).
• Cable: 1 meter connection cable included.

Specifications

• Volume: 98 Liter
• Corrosion protection: Enameled steel
• Type: Water heater
• Thermostat: Traditional
• Pipe connection: Down
• Type name: Type 644
• Dimensions (HxWxD): 1100x460x460mm
• Armature: Diameter 15 / 100mm
• Power 230V: 1kW
• Power 400V: 3kW
• Electrical connection: Yes
• Heating time to 50° at 400 V (approx. min): 102
• Heating time: 4 pcs 3 min
• Protection class: IP24
• Qelec: 6.406
• Rated pressure (bar): 10
• Max safety pressure: 13.5