Kitchen Countertop Oil 500ml Herdins

Description

Herdins Kitchen Countertop Oil (500 ml) is a specially developed oil for wooden surfaces in the kitchen that are exposed to heavy wear. Formulated with carefully selected vegetable oils, it gives your countertop a beautiful, silky-matt finish while preventing cracking and drying out. Approved according to EN 71-3 (toy safety).

The benefits of Herdins Kitchen Countertop Oil

• Effective protection against moisture and stains: Creates a strong water- and dirt-repellent barrier that preserves the wood's natural luster.
• Prevents drying out: Penetrates deep into the wood fibers and prevents cracking.
• Easy to maintain and repair: Worn areas can be easily spot-treated and touched up without the entire board needing to be sanded down.
• Safety approved: Tested and approved according to European standard EN 71-3.

Step by step – How to apply Herdins Kitchen Countertop Oil

Pre-treatment

• Make sure the wooden surface is completely dry and free of grease, dust and dirt.
• Sand clean or previously oiled wood surfaces with sandpaper (grit size 120) to open the wood's pores and remove old oil. This gives an even and durable end result.

Application

• Apply a thin and even layer with a clean cloth or scouring pad.
• Work in the oil and distribute from non-absorbent to more absorbent areas. Add additional oil if necessary so that the entire wooden surface is saturated.
• Important: Wipe off any excess oil thoroughly after 15–20 minutes to prevent sticky or shiny spots.
• Repeat the treatment if necessary.

Finishing & Maintenance

• Finishing: Let the oil cure for about 24 hours. Do not expose the surface to moisture during this time. Then polish with white scouring pad (e.g. the white side of a kitchen sponge) for an extra durable and silky surface.
• Ongoing maintenance: Oil the worktop 2–3 times a year for best durability.

Safety and handling information

• Risk of spontaneous combustion: The product contains drying oils. Rags, rags and sponges that have been used should be soaked in water or burned immediately after use.
• Ventilation: Ensure good air exchange during work and drying as solvent vapors are emitted.
• Source separation: Completely emptied and dry packaging is sorted as sheet metal/metal at a recycling center.

Specifications

• Volume / Packaging: 500 ml tin can
• Contents: Vegetable oils, low-aromatic white spirit
• Gloss: Matt
• Coverage: Approx. 8–10 m² per can (depending on wood type)
• Drying time: Approx. 24 hours
• Tool cleaning: White spirit
• Certification: EN 71-3