Paint Indoor paint Varnish, oil stain and hard wax

Floor Soap White 3L Herdins

Herdins Floor Soap White 3 L is a soy-based soap that cleans gently, protects, and gives a naturally beautiful patina to wooden and scrubbed floors.

Floor Soap White 3L Herdins

Watch this product and we will notify you once it is back in stock.

The product is now watched
We will notify you once the product is back in stock again.

Floor Soap White 3L Herdins

Herdins Floor Soap White 3 L is a soy-based soap that cleans gently, protects, and gives a naturally beautiful patina to wooden and scrubbed floors.

Description

Herdins Floor Soap White is a natural and generous floor soap made from renewable soy oil and pigmented with white titanium dioxide. The soap is especially adapted for sloped and oil-treated wooden floors, but is also excellent as a stand-alone surface treatment on softwood (pine and spruce).

Thanks to its high fat content, the soap saturates the pores of the wood and forms a protective barrier against dirt, wear and moisture. Regular use refines the floor over time and gives the coveted, timeless feeling of a genuine old-fashioned scrubbed floor with a soft, light patina. No separate after-treatment is required – the soap works both as a basic treatment and continuous maintenance.

Dosage & Consumption

  • Regular cleaning & cleansing: 2–3 dl soap, 10 liters of lukewarm water
  • Basic treatment after oiling: 5–8 dl soap, 8–10 liters of cold water
  • Surface treatment (classic scrub floor): 5–8 dl soap, 8–10 liters of cold water

Instructions & Step-by-step

Regular cleaning and maintenance

  • Vacuum or sweep the floor free of grit and dust.
  • Mix 2–3 dl Herdins Floor Soap White with 10 liters of lukewarm water.
  • Dry the floor with a well-wrung mop or scouring cloth in the lengthwise direction of the wood.

Basic treatment after oiling

Do this approximately 2 weeks after the floor has been oiled.

  • Vacuum the surface thoroughly.
  • Mix 5–8 dl floor soap with 10 liters of cold water.
  • Smear the soapy water evenly with a wrung-out cloth or mop in the lengthwise direction of the boards.
  • Wipe with a clean, wrung-out mop so that no excess remains. Repeat the treatment for extra protection.

Create a classic white-finished scrubbed floor

  • Sand: Sand a new or clean wooden floor with sandpaper (grit size 120).
  • Vacuum: Remove all sanding dust very carefully.
  • Dampen the wood: Dampen the surface lightly with clean, cold water before you start soaping to prevent stains.
  • Mix soap mixture: Mix 5–8 dl Herdins White Floor Soap in 8–10 liters of cold water.
  • Scrub: Scrub a few boards at a time along the direction of the fibers with a scrub brush.
  • Wipe up immediately: Wipe up dirty water and excess soap with a scrubbing cloth before moving on to the next section. Never let puddles dry in, as this can cause stains.
  • Repeat: For full protection and an even white surface - repeat the treatment at least 5 times (let dry for about 1 hour between each application).

Specifications

  • Color/Finish: White pigmented
  • Packaging: Plastic can, 3 liters
  • Contents: Concentrated soap made from soy oil, white pigment (titanium dioxide)
  • Suitable surfaces: Untreated, stained or previously oiled softwood and wooden floors
  • Drying time: About 1 hour between treatments when scrubbing floors
  • Storage: Store frost-free and out of reach of children

Reviews

Product review Based on 0 ratings.

Click on a star to rate
You
Retrieve your Facebook profile.

  • Be the first to leave a review.

Related products

Populära produkter

  • No products found.

JavaScript seem to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website.

//