Roof And Panel Paint White 1L Herdins

Description

Herdins Roof & Panel is a water-based, eco-labeled and drip-free stain developed for ceilings and panels made of softwood indoors. The product is the perfect choice for giving old, yellowed panels a beautiful, bright and satin-matt surface, while highlighting the wood's structure.

The stain prevents and reduces both knot bleeding and future yellowing. A big advantage is that you don't have to use knot varnish before treatment. Its smooth consistency and drip-free properties make it extremely easy to work with – especially when painting ceilings – which makes it just as popular with professional painters as it is with DIYers.

Instructions for use & Application

Pre-treatment

• The panel must be completely dry and well cleaned before you start the treatment.
• Clean wooden surfaces: Sand in the direction of the wood grain with sandpaper (grain size 120–150).
• Previously varnished or old yellowed panels: Clean thoroughly with paint thinner or a grease-dissolving alkaline cleaner. Important: Always wash the surface with clean water, regardless of which paint thinner is used.
• If the existing varnish has started to peel, careful sanding is recommended.
• Always test paint on a less visible area to check the shade and adhesion before treating the entire surface.

Application

• Stir the glaze thoroughly and let it rest for a few minutes before painting.
• If you use several cans of the same color, mix them together in advance to avoid differences in gloss and shade.
• Apply the glaze with a soft varnish brush.
• Work systematically in the lengthwise direction of the wood, 2–3 boards at a time. Never finish in the middle of a board.
• Always treat 2 times with at least 12 hours of drying time between coats.

Finishing

• No finishing is normally required.
• On surfaces that are exposed to extra wear, a protective layer of Herdins Clearcoat Aqua is recommended.

Cleaning, Handling & Waste

• Cleaning tools: Wipe brushes and utensils thoroughly. Then clean immediately with soap and water.
• Handling & Storage: Avoid spills and contact with skin and eyes. Store frost-free.
• Waste management: Empty and cleaned packaging is sorted as plastic packaging. Any liquid product residues are left at the nearest environmental station/recycling center.

Important to remember

• Do not use knot varnish before treatment - the glaze has built-in protection against knot bleeding.
• Always mix the contents together if you use several cans of the same color for an even result.

Specifications

• Volume & Packaging: 1 liter plastic can
• Product type: Water-based, eco-labeled and drip-free glaze
• Gloss: Matt
• Available colors/shades: White, Extra White, Full White
• Contents: Water, acrylate binder, titanium dioxide and UV protection
• Suitable substrates: Untreated or previously varnished wood (softwood indoors)

Coverage (two coats)

• Wooden/untreated substrate: approx. 5–8 m² per liter
• Previously varnished substrate: approx. 12 m² per liter

Drying times

• Dust-dry: After approx. 2 hours
• Recoatable: After at least 12 hours