Roof And Panel Paint White 3L Herdins

Description

Herdins Ceiling & Panel White 3L is an eco-labelled, water-borne and drip-free wood stain specially developed for ceilings and panels made of softwood indoors. The product gives old and yellowed surfaces a beautiful, bright and satin finish while highlighting the wood's natural grain and structure in a stylish way.

The stain is developed to make painting work as smooth as possible - its drip-free properties make it extremely popular, especially for ceiling painting, appreciated by both professional painters and DIYers.

Advantages of Herdins Tak & Panel

• Prevents yellowing & knot bleeding: The glaze prevents, reduces and slows down both yellowing and knot bleeding over time.
• No knot varnish needed: You do not need to use knot varnish before treating with Tak & Panel.
• Versatile substrate: Works great on both untreated/clean wood and previously varnished wood.
• Eco-labeled & easy to work with: Contains water, acrylate binder, titanium dioxide and UV protection for a durable and environmentally friendly result.

Instructions for use & Application

Pre-treatment

• Cleaning: The panel should be completely dry and well cleaned before you start.
• Clean wood surfaces: Sand with sandpaper grain 120–150 in the direction of the wood grain before treatment.
• Previously varnished & yellowed panel: Clean with paint remover or a grease-dissolving alkaline cleaner. Regardless of which paint remover is used, the surface should always be washed with clean water.
• Peeling varnish: If the previous varnish has started to peel, sanding is recommended.
• Test application: Always check the shade and adhesion on a less visible surface before you start.

Application

• Stir the varnish thoroughly and let it rest for a few minutes.
• Mixing cans: If you have purchased several packages of the same color, mix them together before treatment to even out any differences in gloss and shade.
• Apply the varnish with a soft varnish brush.
• Work systematically in the lengthwise direction of the wood with 2–3 boards at a time. Never finish in the middle of a board.
• Always treat 2 times and let dry for at least 12 hours between coats.

Cleaning, Handling & Environment

• Cleaning of tools: Thoroughly wipe off brushes and other utensils. Then clean them with soap and water.
• Handling & Storage: Avoid spillage, skin and eye contact. Store frost-free.
• Waste management: Empty and cleaned packaging is sent to packaging recycling. Any product residues are sent to the environmental station.

REMEMBER!

• You should not use knot varnish before treatment with Herdins Tak & Panel.
• Always mix several cans of the same color together in advance for a completely even end result.

Specifications

• Volume / Packaging: 3 liter plastic bucket
• Type: Water-based and drip-free glaze
• Labels: Eco-labeled
• Contents: Water, acrylate binder, titanium dioxide and UV protection
• Color / Shade: White, Extra White and Full White
• Gloss: Matt (satin matt surface)
• Suitable substrate: Untreated or previously varnished softwood indoors
• Finishing: Normally no finishing is required. Herdins Clear Coat Aqua is used on surfaces that will withstand wear and tear.

Coverage (2 coats)

• Wooden surface: approx. 5–8 m²/litre
• Previously painted surface: approx. 12 m²/litre

Drying time

• Dust-dry: after approx. 2 hours
• Can be repainted: after at least 12 hours